18. CHECKLIST FOR FIXING OF MARBLE / GRANITE

 

18. CHECKLIST FOR FIXING OF MARBLE / GRANITE
Name Of Project :
Date of Checking:
Location / Flat / Floor no:
Drawing / Document Reference No.
Sl. No.	Description / Activities / Items to be Checked	Status
1	Check for the safety process is followed for fixing of granite / marble activities.	OK	Not OK
PRIOR TO TILLING WORK
1	Check for approval of work methodology for fixing of granite / marble	OK	Not OK
2	Check for availability of Tool and tackles for fixing of granite / marble	OK	Not OK
3	Check for pattern and shade of granite / marble is approved from client or consultant.	OK	Not OK
4	Check for cleanliness of base surface. No loose mortar, dead concrete on the floor.	OK	Not OK
5	Check for completion of preceding activities Like; fixing of doors frames, electrical boxes, plumbing & fire fighting pipes, HVAC, raceways, etc.	OK	Not OK
6	Check for fixing of Level Pads.( both horizontal & vertical surface)	OK	Not OK
7	Check whether application is by Ordinary Cement mortar or Tile adhesive for tile fixing.	OK	Not OK
8	Check for size, alignment & level of panels is as per drawing.	OK	Not OK
9	Check for the marking of start point of granite / marble work.	OK	Not OK
	Check for the pre polished or post polish granite / marble to be used.
DURING TILING WORK
1	Check for proportion of cement mortar mix	OK	Not OK
2	Check for the proper mixing of Tile adhesive as per manufacturer guideline.	OK	Not OK
3	Check for thickness of mortar bed as per the drawings or required level.	OK	Not OK
4	Check for the fixing over mortar bed with thick Cement Slurry.	OK	Not OK
5	Check for the Pattern of laying.	OK	Not OK
6	Check for the Thickness of joints between granite / marble.	OK	Not OK
7	Check for the Slope as per drawing	OK	Not OK
8	Check for the True level surface w.r.t level.	OK	Not OK
9	Check for the Matching of granite / marble joints with no lipage/ offset	OK	Not OK
10	Check for the Finishing of edges for cut granite / marble.	OK	Not OK
11	Check for cleaning of granite / marble joints.	OK	Not OK
12	Check the top surface of under layer rough enough  to ensure proper adhesion	OK	Not OK
AFTER TILING
1	Check for cleaning of granite / marble joints.	OK	Not OK
2	Check for the filling of approved grout at the joints of granite / marble.	OK	Not OK
3	Check for cleaning and protection of granite / marble surface.	OK	Not OK
4	Check for  grinding and polishing wherever applicable.	OK	Not OK
5	Check for curing arrangements and sufficiency  of curing. (if it is required)	OK	Not OK
6		OK	Not OK
Remarks: