6. CHECKLIST FOR REINFORCEMENT CUTTING, BENDING & FIXING WORKS

 

6. CHECKLIST FOR REINFORCEMENT CUTTING, BENDING & FIXING WORKS
Name Of Project :
Date of Checking:
Location / Grid no:
Drawing / Document Reference No.
S.No.	Description / Activities / Items to be Checked	Status
1	Check the safety process is followed for reinforcement steel activities.	OK	Not OK
2	Check Bar Bending Schedule (BBS) is approved prior to start cutting & bending.	OK	Not OK
3	Check the grade of reinforcement steel as per drawing / specification.	OK	Not OK
4	Check the quality approval of the reinforcement steel.	OK	Not OK
5	Check correct dia. & size of bar is used as per BBS.	OK	Not OK
6	Check no of bar is used as per BBS.	OK	Not OK
7	Check for correct fixing of bars as per construction drawings.	OK	Not OK
8	Check the lap lengths and location of the bar as per requirements.	OK	Not OK
9	Check the lapping are provided in staggered manner.	OK	Not OK
10	Check the approved grade & brand of coupler is used (if Coupler is recommended).	OK	Not OK
11	Check proper fixing of Coupler (if Coupler is recommended).	OK	Not OK
12	Check Spacing & tied of bar as specified in drawing / BBS	OK	Not OK
13	Check the type & gauge of binding wire is used as per specification.	OK	Not OK
14	Check proper Cover to top, bottom & sides are provided as per requirement.	OK	Not OK
15	Check no of chairs & Spacers provided. (no and length/shape of chairs to be mentioned)	OK	Not OK
16	Check the master ring is provided as per requirements.	OK	Not OK
17	Check insert plates are provided as per drawing.	OK	Not OK
18	Check Electrical conduting activities completed.	OK	Not OK
19	Check other MEP works are completed.	OK	Not OK
20	Any other points:	OK	Not OK
Remark: