5. CHECKLIST FOR SHUTTERING WORKS

 

5. CHECKLIST FOR SHUTTERING WORKS
Name Of Project :
Date of Checking:
Location / Grid no:
Drawing / Document Reference No.
Sl.No.	Description / Activities / Items to be Checked	Status
1	Check the safety process is followed for shuttering activities.	OK	Not OK
2	Check the availability of shuttering scheme.	OK	Not OK
3	Check Level of slab/beam/column/shear wall/concrete walls as per drawing.	OK	Not OK
4	Check all the shuttering plates /plywood cleaned properly.	OK	Not OK
5	Check type of oil used on for the surface of shuttering.	OK	Not OK
COLUMN / VERTICAL MEMBRE
6	Check for Stability, Safety & rigidity of assembled shutterings.	OK	Not OK
7	Check for alignment of all vertical members at floor level with respect to grid lines.	OK	Not OK
8	Check plumb for vertical members.	OK	Not OK
9	Check right angle and diagonals of the shuttering from top	OK	Not OK
10	Check for adequate supports are provided as per shuttering design.	OK	Not OK
11	Check for adequacy of cover block.	OK	Not OK
SLAB & BEAM
12	Check the alignments, level and diagonals of beam bottom & beam sides with respect to the vertical members.	OK	Not OK
13	Check the verticality of beam sides and confirm slab dimensions.	OK	Not OK
14	Check the line and level of slab.	OK	Not OK
15	Check for vertical supports/cross supports/horizontal supports as per shuttering scheme.	OK	Not OK
16	Check for horizontal bracing in case of single/double bracing.	OK	Not OK
17	Ensure locking of vertical support system with vertical members.	OK	Not OK
18	Check for sealing of gaps, joints, holes and tie rods.	OK	Not OK
DESHUTTERING
19	Check the require strength is achieved	OK	Not OK
20	Check for deshuttering time after concreting as per specification.	OK	Not OK
21	Check the condition of Shuttering assembly.	OK	Not OK
22	Are repairs required? (If so send to shuttering yard).	OK	Not OK
23	Clean, oil and stack shuttering material for future use?	OK	Not OK
24	Clean the area after deshuttering.	OK	Not OK
Remark: